Made with 2-7/8" (outside diameter) galvanized steel pipe encased in polyurethane. Each Post is rated for a 12,000 pound load. Posts can be trimmed to length prior to installation and top and/or bottom square portions can be lengthened by special order.
Each Post includesinstallation instructions, Hardware Installation Kit, and Trim Collar (similar to that shown at bottom of PP3204 and PP3205). Collars are not included in Posts dimensions and add about 1-3/4" all around. Quantity discounts available.
PP3204 has 12" x 12" square top and 10-1/2" square base, not including pictured Trim Collar at base. All other Posts on this page have the same top and base dimensions, except the Lamp Post.
Half Posts are available with a non-structural PVC center pipe. All designs on this page require ordering two Halves which are not returnable unless defective.
Lamp Post LP 3700 is not structural and should not be used as a Porch Post. For a similar design that is structural, please see our Polyethylene Posts.