We have four styles of Wainscot Cap Moulding to expertly finish the top edge of your wainscoting. Additional Cap Mouldings less suitable for wainscot cap are also available.
Click on a drawing to view larger
Cap Moulding (54-210)
Shown above and to the left. 11/16" x 2". Will extend the height of your wainscoting about 1-1/4". Notch fits over the edge of 3/8" to 3/4" thick wainscotting.
1" Nosing (54-261)
1-1/8" x 1-3/4". Will extend the height of your wainscoting about 1-1/4". When ordering below specify whether you want it notched to fit over the top edge of 3/8", 1/2" or 5/8" thick wainscotting.
Because this Nosing is nicely rounded on the front edge, and because it is solid wood, it makes a very handsome and durable chair rail. View in Use.
Ledge Cap (54-241)
Ledge Cap Moulding (54-241) (three widths available, each 3/4" thick) can be used over various other Mouldings or directly over the top of your Beadboard. For example, you can install our Casing horizontally over the top several inches of the wainscoting and cap the Casing with Ledge Cap Moulding to create a small ledge above your wainscot. Any of our Mouldings with flat backs can be used in place of the Casing. View in Use.
AZEK® Brand PVC Wainscot Cap (AZ-284)
1" x 2-1/4". PVC only. A perfect complement to AZEK® Brand Beadboard! Will extend the height of your wainscoting about 1/2". Notch fits over the top edge of 1/2" or 5/8" thick wainscotting. Please order at AZEK Miscellaneous Mouldings
Quantity Based Pricing
Price is per foot, based on TOTAL feet of Wainscot Cap ordered in any one design/material combination.
See explanation and examples