2" x 3" x 20" Oval Cedar Baluster (Spindle), Premium Kiln-Dried Western Red Cedar

# MS-CTO2320

See MORE OPTIONS for additional designs & sizes.


Premium kiln-dried Western Red Cedar Turned Balusters. Bottom Notching option below is for Sloped-top Bottom Rail - very important for exterior projects!

For 12" and shorter see Chunky Spindles. Also, see Turned Hemlock, Plain Square, High Density Polyurethane, Sawn, and Interior Balusters.


2" x 3" x 20" MS-Oval (far left - CTO2320)

Also available:
    2" x 3" x 24" (CTO2324)
    2" x 3" x 28" (CTO2328)
    2" x 3" x 32" (CTO2332)
    2" x 3" x 36" (CTO2336)

Nominal (trade) sizes are listed above. Actual cross section size is 1-7/16" x 2-1/8" and actual lengths are 1/4" shorter.


See Turned Cedar Baluster Measurements Chart for length of square tops and bottoms.     CA Resident WARNING

2" x 3" Oval Turned Cedar Balusters
When installed with their wider face toward the street (as shown above) our Oval Balusters create a substantial effect similar to 3" x 3" Balusters, but cost much less. The turned section is oval rather than round and is quite elegant! If you're ordering Bottom Notching for these Oval Balusters, we will assume you're installing them with their wider face out and we will notch accordingly unless you request otherwise.


VERY IMPORTANT! Read before ordering:
     Baluster Information (Size Matching Chart, Height Calculator, Qty Needed, Spacing, Installation, etc.)

ORDER 2" x 3" x 20" Oval BELOW
        or see MORE OPTIONS for additional designs and sizes.