Vintage Woodworks
Architectural Details Direct - 903-356-2158
Home Contact Us Help Shipping Shopping Cart 903-356-2158 Porches Doors Gables Brackets BeadBoard Mouldings Azek Photos Our Story Guarantee Customer Comments Product Options A-Z Index Pictorial Index< Previous Page Text for Rail InstallationPreviously worked up for Fastening Kit for Savannah Top Rail with Wood Insert Fastening Kit includes: 6 - 1-1/4" galvanized deck screws 4 - 2-1/2" galvanized deck screws 2 - Aluminum Savannah Rail Fasteners Installation 1. Trim Wood Inserts 1/4'' shorter than Rail to allow space for 1/8'' thick Fastener on each end of Rail. 2. Locate 2 punched tabs immediately below 3 drilled holes in Aluminum Fastener. Position Fastener perpendicular to end of Wood Insert with protruding portion of tabs inside the bottom channel of Insert and immediately under the Insert. When properly positioned, the 3 drilled holes will be ready to accept screws into end of Insert and the end of the Insert will be resting on the punched tabs of the Fastener. 3. Starting with the center screw, install three 1-1/4'' screws into end of wood insert. Repeat Steps 2 and 3 on other end of Savannah Rail. 4. Install Fasteners on Bottom Rail. 5. Place assembled Rail Section into final position. You can use temporary block cut from scrap to hold Section at proper height. Make a mark at the top of each of the two notches in both Savannah Fasteners. 6. Set assembled Rail Section aside. Install two 2-1/2'' screws on marks at each end. Leave screw heads just under 1/8'' from surface. 7. Place assembled Rail Section into final position, forcing the top Fasteners down over protruding screws until snug. 8. Screw bottom Fasteners into place, being sure Balusters are plumb. Previously worked up for Fastening Kit for Standard Top Rail with Wood Insert Fastening Kit includes: 6 - 1-1/4" galvanized deck screws 4 - 2-1/2" galvanized deck screws 2 - Aluminum Standard Top Rail Fasteners Installation 1. Trim Wood Inserts 1/4'' shorter than Rail to allow space for 1/8'' thick Fastener on each end of Rail. 2. Locate 2 punched tabs immediately below 3 drilled holes in Aluminum Fastener. Position Fastener perpendicular to end of Wood Insert with protruding portion of tabs inside the bottom channel of Insert and immediately under the Insert. When properly positioned, the 3 drilled holes will be ready to accept screws into end of Insert and the end of the Insert will be resting on the punched tabs of the Fastener. 3. Starting with the center screw, install three 1-1/4'' screws into end of Wood Insert. Repeat Steps 2 and 3 on other end of Standard Top Rail. 4. Install Fasteners on Bottom Rail. 5. Place assembled Rail Section into final position. You can use temporary block cut from scrap to hold Section at proper height. 6. Attach Standard Top Rail with two 2-1/2'' screws at each end. 7. Screw bottom Fasteners into place, being sure Balusters are plumb. |
|
| |||
| RELATED PAGES | |||
 Porches - START HERE! | |||
 Gable Decorations | |||
 Screen/Storm Doors | |||
 Spandrels | |||
 Brackets | |||
 AZEK® Brand PVC | |||