Typically used with Handrails without a bottom channel (plow). During installation, holes are drilled into the bottom of the Handrail to accept the round tops of these Baluster. Bottom sections are square, in the dimension listed for each Baluster. Height includes bottom pins (except as noted) for mounting directly into the treads or flooring. Pins are 3/4" in both diameter and length.
"F" at end of a product number indicates fluting in the main turned area and "T" indicates twist design. Primed Balusters are typically Pine. A 10% restocking fee applies to returned Taper Top Balusters.
Bottom Pins on Balusters below are approximately 5/8" in diameter.
Although some Balusters are offered as primed, they are for interior use only and are not recommended for exterior use.
(Drawings not to scale.)
To view PRICES, scroll below graphics on this page and select a Baluster design.
ORDER HERE (Please make a selection to calculate Price)