Architectural Details Direct - 903-356-2158

All Door and Window Caps on this page are standard with Block Design #6 and Casing Design #74. (If you want different Casing and/or Block designs, please specify them in the option pop-downs on item pages.)

When installed, Blocks should center on vertical Casing (study Casing & Block Installation Overview and #5452 Usage Photo). Thus, length B should be 1/2" more than overall opening width to outside edges of vertical Casing. Length A is 2-5/8" more than B. When ordering, specify overall length A and Block & Casing designs. Example: If overall opening width to outside edges of Casing is 36", A will be 36" + 1/2" + 2-5/8" = 39-1/8".

Caps are shipped fully assembled but individual components can be ordered separately. If you buy individual components you must miter the mouldings' ends and order special-sized, square-edged Casing.
Cap #54-220 (top piece)
Cap #54-232 (second piece)
Block Design #6 (standard)
Casing - Please inquire for custom Casing.
1/2" Bull Nose #54-270 (bottom)

	Cap #5452n7 (7-1/2" tall) Click for Details

	Cap #5452n8 (8-1/2" tall) Click for Details

	Door & Window Cap Bargains Click for Details


RELATED PAGES
D&W Cap Usage Photo
Cap Usage Examples
Casings
Blocks, Corner/Base
Cornices